Tuotteen yhteenveto
Electronically controlled safe deposit locks with dead bolt.
The E-lo-safe series offers a range of locks with different control features within the same basic design.
In the version 79106 the lock is operated by a turning knob. This version is mainly suitable for self-service stations where the complete release is authorised electronically.
tuotteen yksityiskohdat
Approvals/Certificates
- Without any approvals/certificates
Lock
- Renter lock with turning knob for self-service stations
- Opening with turning knob after electronic release
- Die-cast lock case and bolt, throw 12 mm
- Control latch plastic, black
- Weight approx. 450 g
Admissible mounting positions
- Right hand lock, opening clockwise
Tekniset yksityiskohdat
Lock
- E-lo-safe D - standard - Order number: 79106
Options
- Turning knob, for door thickness from 3-33 mm - Option code: DKA
- Turning knob, for door thickness from 34-54 mm - Option code: DKC
- Tamper switch - Option code: AHK
- Lock case and bolt surface treated - Option code: SRO
- Connector - Option code: MTA156
Lock function
- Passive release control:
- After authorisation at the central control the current feed of the release solenoid starts immediately. After the lock has been opened (key turned) the current feed is interrupted.
- Deposit box monitoring:
- Using this concept only a limited monitoring of the deposit box is possible (e.g. box has been broken open).
Key/latch contact (separate line), cable 5 wires, usable length 200 mm, cable ends tin-plated
- Interface: Input
- Function element: Release solenoid
- Specification: 360 Ohm, Umin=13 V DC
- Operating time (OT): 13 V: 100% OT, 24 V: 48% OT
- Option code: FSK005
- Interface: Output
- Function element: Key/latch contact
- Specification: Change over contact, 50 mA, 30 V DC
- Operating time (OT): 13 V: 100% OT, 24 V: 48% OT
- Option code: FSK005
Alternative operating voltage (resistance solenoid)
- Interface: Input
- Function element: Release solenoid
- Specification: 148 Ohm, Umin=5 V DC
- Operating time (OT): 6 V: 100% OT, 12 V: 87% OT, 24 V: 15% OT
- Option code: OHM148
- Interface: Input
- Function element: Release solenoid
- Specification: 563 Ohm, Umin=20 V DC
- Operating time (OT): 24 V: 87% OT
- Option code: OHM563
Toiminnot
Lock function
- Active release control:
- After authorization at the central control a supply voltage is applied at the lock. The current feed of the release solenoid starts after the lock has been opened (key turned).
- Deposit-box monitoring:
- Using this concept it is possible to monitor the lock/deposit box (e.g. lock has been manipulated or box has been broken open).
Electronically controlled lock, cable 2 wires, usable length 211 mm, cable ends tin-plated
- Interface: Input
- Function element: Release solenoid
- Specification: 360 Ohm, Umin=13 V DC
- Operating time (OT): 13 V: 100% OT, 24 V: 48% OT
- Interface: Output
- Function element: Key/latch contact
- Specification: Normally closed, 50 mA, 30 V DC
- Operating time (OT): 13 V: 100% OT, 24 V: 48% OT
Lock function
- Passive release control:
- After authorisation at the central control the current feed of the release solenoid starts immediately. After the lock has been opened (key turned) the current feed is interrupted.
- Deposit box monitoring:
- Using this concept only a limited monitoring of the deposit box is possible (e.g. box has been broken open).
Key/latch contact (separate line), cable 5 wires, usable length 200 mm, cable ends tin-plated
- Interface: Input
- Function element: Release solenoid
- Specification: 360 Ohm, Umin=13 V DC
- Operating time (OT): 13 V: 100% OT, 24 V: 48% OT
- Interface: Output
- Function element: Key/latch contact
- Specification: Change over contact, 50 mA, 30 V DC
- Operating time (OT): 13 V: 100% OT, 24 V: 48% OT
Etkö löydä etsimääsi?
Ota meihin yhteyttä