Tuotteen yhteenveto
Lock with dead bolt prepared for cylinder.
This lock is suitable for external applications as the entire surface is surface treated.
It is available with a double-bitted locking (for interior applications) as an option. The profile cylinder is not included in the delivery.
tuotteen yksityiskohdat
Approvals/Certificates
- Without any approvals/certificates
Lock
- Prepared for profile cylinder
- Steel lock case, surface treated
- Die-cast bolt, surface treated, throw 12mm
- Weight approx. 380 g
Admissible mounting positions
- Right hand lock, opening clockwise
Tekniset yksityiskohdat
Lock
- Curator 80 - standard - Order number: 72081
Options
- Lock with 3-way closure - Option code: SDS
- Lock with double-bitted locking
- Option code: SDB
- 7 levers, electrolytic galvanised steel
- Key retained when in open position
- Right hand lock, opening clockwise
- Not key retained when in open position, not suitable for access doors (only for option SDB)- Option code: SAB
- Key guide projecting 4.5 mm, aluminium EV1 anodised, Ø 29.5 mm, riveted (only for option SDB)- Option code: SFA4.5
- Key guide projecting 7 mm, aluminium EV1 anodised, Ø 29.5 mm, riveted (only for option SDB)- Option code: SFA007
- Key guide projecting 8.5 mm, aluminium EV1 anodised, Ø 29.5 mm, riveted (only for option SDB)- Option code: SFA8.5
- Key guide projecting 12.5 mm, aluminium EV1 anodised, Ø 29.5 mm, riveted (only for option SDB)- Option code: SFA12.5
Left hand lock
- opening counter-clockwise - Option code: SLG
Accessories
- Mounting plate 2 mm thick with threaded bushings, screws and securing rings - Order number: 3 118 000 600
- Manganese steel plate 1.5 mm thick - Order number: 2 130 001 280
Etkö löydä etsimääsi?
Ota meihin yhteyttä