Subcontractors

Expand your expertise in just one day with our intensive classroom training course on swing door operators. This training course introduces the functions and capabilities offered by swing door operators, allowing you to give customers advice that is both on point and technically sound.

The target group includes partner companies and subcontractors of dormakaba Switzerland Ltd.

Refer to the dormakaba Learning Portal for all available dates. This is a one-day classroom training course and takes place at our site in Wetzikon. This training is available in German.

This training is free of charge for dormakaba subcontractors.

If you do not yet have access to the dormakaba Learning Portal, please register using this link.   

Hansueli Schweizer
Sales Expert Door Control

This course provides a comprehensive presentation of the products, with participants developing a detailed understanding of ED 100/ED 250 swing door operators. It also focuses on how to properly install the systems, whereby participants acquire the necessary knowledge and skills to ensure precise installation. This training also explains how the various components are connected and looks at the functional and safety checks involved. This is followed by a deep dive into the commissioning and parameterising of the drives, enabling participants to learn how to optimally adjust the systems to the specific requirements. This training also covers troubleshooting and repair to ensure that professionals are able to identify potential problems and implement effective solutions. The course closes with information on service and maintenance tasks. This is to give participants the necessary knowledge to organise the regular upkeep and maintenance of swing door operators.

The target group includes partner companies and subcontractors of dormakaba Switzerland Ltd.

Refer to the dormakaba Learning Portal for all available dates. This is a one-day classroom training course and takes place at our site in Wetzikon. This training is available in German.

This training is free of charge for dormakaba subcontractors.   

If you do not yet have access to the dormakaba Learning Portal, please register using this link.   

Jürg Näf
Head of Technical Support Automatic Market Switzerland

The ES PROLINE sliding door operator is presented at the beginning, with its functions, features and possible applications all explained. It focuses on how to properly install the system, including detailed instructions, practical demonstrations and hands-on exercises. This training also explains how the system components are connected and looks at functional and safety checks to ensure proper installation.

Further content includes the commissioning and parameterisation of the sliding door drives, while also taking individual requirements into account. This training gives participants strategies and techniques for troubleshooting, accompanied by practical exercises for fault rectification and repairs. The course closes with a discussion on important aspects relating to the regular maintenance of ES PROLINE sliding door operators.

The target group includes partner companies and subcontractors of dormakaba Switzerland Ltd.

Refer to the dormakaba Learning Portal for all available dates. This is a two-day classroom training course and takes place at our site in St. Gallen. This training is only available in German.

The training is free of charge for dormakaba subcontractors.

After completing this course, you will be authorised to install, commission and maintain ES PROLINE sliding door operators.

If you do not yet have access to the dormakaba Learning Portal, please register using this link.      

Jürg Näf
Head of Technical Support Automatic Market Switzerland

This training course on ES 200 sliding door operators from dormakaba begins with a comprehensive product introduction where the functions and potential applications are explained in detail. Participants also receive practical instructions on how to properly install the system, with a focus on demonstrations and hands-on exercises. This training guides participants through the commissioning steps and shows them how to parameterise the system according to individual requirements. Strategies and techniques for identifying faults make up another important part of this training. Practical exercises in troubleshooting and repair deepen participants’ skills in this area. The final section focuses on the regular maintenance of ES 200 sliding door operators, training participants in best practices for efficient service.

The target group includes partner companies and subcontractors of dormakaba Switzerland Ltd.

Please note that prior participation in the on-site "Installation Training on ES PROLINE Sliding Door Operators" is a prerequisite for registering for this training course.

Refer to the dormakaba Learning Portal for all available dates. This is a one-day classroom training course and takes place at our site in St. Gallen. This training is only available in German.

We offer this training free of charge for dormakaba subcontractors.

After completing this course, you will be authorised to install, commission and maintain ES 200 sliding door operators.

If you do not yet have access to the dormakaba Learning Portal, please register using this link.      

Jürg Näf
Head of Technical Support Automatic Market Switzerland

An overview of the products is provided at the beginning, including detailed presentations on functions and potential applications. In a practice-orientated block, participants are instructed on how to connect the system components and perform functional and safety checks to ensure safe installation. This training also covers the steps involved in the successful commissioning of sliding door operators and how to parameterise the system to meet individual requirements. It also focuses on strategies and techniques to allow participants to identify malfunctions effectively, accompanied by practical exercises for troubleshooting and repair.

The target group includes partner companies and subcontractors of dormakaba Switzerland Ltd.

Please note that prior participation in the on-site "Installation Training on ES PROLINE Sliding Door Operators" is a prerequisite for registering for this training course.

Refer to the dormakaba Learning Portal for all available dates. This is a four-hour classroom training course and takes place at our site in St. Gallen. This training is only available in German.

This training is free of charge for dormakaba subcontractors.

After completing this course, you will be authorised to install, commission and maintain ES 400 sliding door operators.

If you do not yet have access to the dormakaba Learning Portal, please register using this link.       

Jürg Näf
Head of Technical Support Automatic Market Switzerland

This training covers relevant EU and Swiss regulations, directives and standards, and focuses on the safety aspects of automatic door systems. The practical part of this course takes a hand-on approach to the safety checks. Completion of the course is confirmed by a certificate test.

The target group includes partner companies and subcontractors of dormakaba Switzerland Ltd.

Refer to the dormakaba Learning Portal for all available dates. This is a one-day classroom training course and takes place at our site in St. Gallen. This training is only available in German.

This training is free of charge for dormakaba subcontractors.

After completing this course, you will be qualified to perform safety checks on automatic door systems.

If you do not yet have access to the dormakaba Learning Portal, please register using this link.    

Jürg Näf
Head of Technical Support Automatic Market Switzerland

This training gives participants a comprehensive insight into dormakaba revolving doors by presenting detailed functions and potential applications. In a practice-orientated block, participants receive instructions on how to connect the revolving door components and perform functional and safety checks to ensure reliable installation. Participants also learn the steps involved in the successful commissioning of revolving doors and how to parameterise the system to meet individual requirements. This training deepens participants’ understanding when it comes to identifying malfunctions through strategies and techniques. Practical exercises in troubleshooting and repair allow this knowledge to be applied in practice. In addition, important aspects concerning the regular maintenance of revolving doors will be covered and participants will receive training in best practices for efficient service.

The target group includes partner companies and subcontractors of dormakaba Switzerland Ltd.

Refer to the dormakaba Learning Portal for all available dates. This is a one-and-a-half-day classroom training course and takes place at our site in St. Gallen. This training is only available in German.

This training is free of charge for dormakaba subcontractors.

After completing this course, you will be authorised to install, commission and service dormakaba revolving doors.

If you do not yet have access to the dormakaba Learning Portal, please register using this link.      

Jürg Näf
Head of Technical Support Automatic Market Switzerland

You will receive detailed information on the functions and potential applications of HSW EM 180/250 horizontal sliding walls from dormakaba, providing you with a comprehensive overview of the products. This training also includes practical instructions on how to connect the sliding wall components. Functional and safety checks are carried out to ensure that the installation is reliable, and you will learn the necessary steps for successful commissioning of the horizontal sliding walls. This training deepens participants' understanding by presenting strategies and techniques to help them identify malfunctions effectively. This section is rounded off by some practical exercises in troubleshooting and repair. In the final part of the course, you will gain insights into important aspects concerning the regular maintenance of horizontal sliding walls and be trained in best practices for efficient service.

The target group includes partner companies and subcontractors of dormakaba Switzerland Ltd.

Refer to the dormakaba Learning Portal for all available dates. This is a one-day classroom training course and takes place at our site in St. Gallen. This training is only available in German.

This training is free of charge for dormakaba subcontractors.

After completing this course, you will be authorised to install, commission and service HSW-EM 180/250 horizontal sliding walls.

If you do not yet have access to the dormakaba Learning Portal, please register using this link.      

Jürg Näf
Head of Technical Support Automatic Market Switzerland

This course covers relevant EU and Swiss regulations, directives and standards, and focuses on the safety aspects of automatic revolving door systems. It also includes practical exercises for performing safety checks. Completion of the course is confirmed by a certificate test.

The target group includes partner companies and subcontractors of dormakaba Switzerland Ltd.

Please note that prior participation in the on-site "Training on KTC/KTV Revolving Door Installation" is a prerequisite for registering for this training course.

Refer to the dormakaba Learning Portal for all available dates. This is a four-hour classroom training course and takes place at our site in St. Gallen. This training is only available in German.

This training is free of charge for dormakaba subcontractors.

After completing this course, you will be qualified to perform safety checks on automatic revolving door systems.

If you do not yet have access to the dormakaba Learning Portal, please register using this link.     

Jürg Näf
Head of Technical Support Automatic Market Switzerland