Productoverzicht:

The 4-sided bolt work is characterised by its smooth running gear wheel and its solid construction.

No defined locking order in case of 2-lock operation.

Productdetails

Bolt work

  • Dimensions base plate 210 x 200 mm
  • Installation applications
    • 2-lock operation
    • 4-sided, shafts 72 mm wide, 2.5 mm thick
    • Shaft throw 30 mm, opening angle of handle 90°
    • Shaft connections: elongated hole 6.4 x 13.6 mm, Ø 6.4 mm
    • Lock mounting: 4 x ¼" BSW threaded bushes
    • Mounting position of locks: vertical, bolt down, bolt throw 8.7-12 mm, blocking of horizontal shafts
    • For right hand doors, opening counter-clockwise

NB: "Opening counter-clockwise" is the standard opening direction for right hand doors with lever handles.

If the door is equipped with a hinged handle, we recommend "opening clockwise".

  • Material/surface
    • Base plate and cover plate steel lacquered
    • Shafts steel blank
  • Gear drive with follower 8 mm
  • Weight approx. 2,850 g

Technische details

Bolt work

  • Defender 520 - standard - Order number: 84011

Options

  • Installation applications
    • 3-sided (front shaft I, upper shaft II, lower shaft III) - Option code: SDS
    • 2-sided (front shaft I, hinge side shaft IV) - Option code: SZS
    • Shaft throw 20 mm, opening angle of handle 60° - Option code: HUB020
    • Shaft throw 25 mm, opening angle of handle 75° - Option code: HUB025
    • Lock mounting: 4 M6 threaded bushes - Option code: SVG
    • Gear drive with follower 11 mm - Option code: ZRA011
    • Anti-panic opening function, suitable for access doors (only 1 lock blocking position available) - Option code: APF
    • For right hand doors, opening clockwise - Option code: SRI
    • For left hand doors, opening counter-clockwise - Option code: SLG
    • For left hand doors, opening clockwise - Option code: SLI
  • Manipulation protection
    • Prepared for lock cover (fixing pins for glass or stainless steel plate) - Option code: VSD
    • Manganese steel plate as drilling protection, 1.5 mm thick - Option code: MNB1.5
    • Manganese steel plate as drilling protection, 3 mm thick (2 x 1.5 mm) - Option code: MNB003
    • Guide pins for tightening cord - Option code: FSD
  • Surface
    • Shafts galvanised blue - Option code: OZN

Special types on request

Defender 520

We laten je graag meer zien

Dodewaard hoofdvestiging Nederland
Dalwagen 45
6669 CB Dodewaard, Nederland

Phone: +31 88 352 33 33
E-Mail: info.nl@dormakaba.com

Neem contact op

Kunt u niet vinden wat u zoekt?

Neem contact met ons op