Defender 510 - Bolt Work

The 4-sided bolt work is characterised by its smooth running gear wheel and its solid construction.

Defender 510 is designed as a 1-lock operated bolt work.

Product Details

Bolt work

Dimensions base plate 210 x 120 mm
Installation applications
- 1-lock operation
- 4-sided, shafts 72 mm wide, 2.5 mm thick
- Shaft throw 30 mm, opening angle of handle 90°
- Shaft connections: elongated hole 6.4 x 13.6 mm, Ø 6.4 mm
- Lock mounting: 4 x ¼" BSW threaded bushes
- Mounting position of locks: vertical, bolt down, bolt throw 8.7-12 mm, blocking of horizontal shafts
- For right hand doors, opening counter-clockwise

NB: "Opening counter-clockwise" is the standard opening direction for right hand doors with lever handles.

If the door is equipped with a hinged handle, we recommend "opening clockwise".

Material/surface
- Base plate and cover plate steel lacquered
- Shafts steel blank
Gear drive with follower 8 mm

Technical Details

Bolt work

Defender 510 - standard - Order number: 84012

Options

Installation applications
- 3-sided (front shaft I, upper shaft II, lower shaft III)
- 2-sided (front shaft I, hinge side shaft IV)
- Shaft throw 20 mm, opening angle of handle 60°
- Shaft throw 25 mm, opening angle of handle 75°
- Lock mounting: 4 M6 threaded bushes
- Gear drive with follower 11 mm
- For right hand doors, opening clockwise
- For left hand doors, opening counter-clockwise
- For left hand doors, opening clockwise
Manipulation protection
- Prepared for lock cover (fixing pins for glass or stainless steel plate)
- Manganese steel plate as drilling protection, 1.5 mm thick -
- Manganese steel plate as drilling protection, 3 mm thick (2 x 1.5 mm)
- Guide pins for tightening cord
Surface
- Shafts galvanised blue