Orthos Anti-Backtrack Lanes

dormakaba developed anti-backtrack lanes (sometimes refered to as one-way exit corridors) to guide the flow of arriving passengers at the air terminal. They perform the task of preventing arriving passengers returning to airside areas, simultaneously preventing non-passengers from entering areas such as baggage claim or passport security control areas.

This modular system is equipped with a series of motion presence and video analytic sensors that are designed to detect unattended objects left within or passed through the corridor area. As passengers exit through the corridor, full-height and half-height double swing doors automatically open and close based upon a programmed flow or interlock mode. Combined, the physical barrier and advanced sensor technology provide a secure detection and entry prevention solution without the need of a guard.
Some benefits of anti-backtrack lanes, include:

•    Stainless-steel construction
•    Customisable configuration
•    High throughput
•    Safety sensors prevent unintentional contact with the moving door panels
•    Modular construction supports a multi-lane configuration

Orthos Anti-Backtrack Lanes Security Interlocks - Entrance Systems

Product Details

Provides a Secure Exit Lane Without the Use of a Guard
ROI is Potentially 18 Months or Less
Anti-backtrack lanes with stainless Steel Construction
Stand Alone System Designed to Monitor, Alert, Notify & Isolate Potential Intruders
Video Analytic Surveillance System Provides Real Time Video Streams While Tracking Potential Intruder
Audible and Visual Alarm at Unauthorized Passage in Opposite Direction
Integrates Into Existing Airport Security & Fire Detection Systems
Flow or Interlock Modes Provide the Most Secure and Highest Throughput Available

Technical Details

Construction

Passage width - Approx 25 1⁄4“ – 37 1⁄2“ (640mm - 950mm)
Standard is 64 1⁄4“ (920mm)
Total width - 42 3⁄8“ – 54 5⁄8“ (1076mm - 1386mm)
Total length - As specified
Total height - 90 5⁄8“ (2300mm)
Passage height - 82 3⁄4“ (2100mm)
Height of barrier gate - As specified
Header height - 8“ (200mm)

Body

Anti-backtrack lanes with self-supporting structure is made of stainless steel AISI 304. glazing: 6 mm toughened glass. Control unit and maintenance opening at the top. Operating panel required (supplied by customer or optional OPL 02).

Finish

Stainless steel satin finish

Electrical components

All power supplies, controls and interface boards are housed in a stainless steel, top mounted enclosure accessible from inside the corridor.
Power: 120VAC 60hz 20A dedicated circuit. It is highly recommended a zero delay UPS system is used on each lane.

Installation

Security interlock mounted to level finished floor. Please consider utilities, tension cables or expansion joints

Functionalities

The dormakaba anti-backtrack lanes manages the egress of passengers in one direction, from airside to landside. A combination of microwave, infrared and video sensors monitor the entire area of the corridor to detect, notify and isolate unauthorised access from the landside area.

While serving as a high security deterrent to access, the dormakaba anti-backtrack corridors implement an advanced level of safety sensors, positioned to protect authorised persons as well as identify unauthorised intruders.