VAROS - Mechanical Key Lock
Changeable lock with dead bolt for safes CEN III-V.
Approx. 10 million theoretical variations.
Standard footprint.
The lock offers an unprecedented change to a new key set from the front side only by means of the user key and without additional tools. It can be specified as factory coded or in change position. If delivered in change position works keys are not required.
The new "Mini Bit" key geometry allows a simple installation in safes that are prepared for installation of mechanical or electronic combination locks. No special key hole design is required.
Gerelateerde producten
Primus C
14 levers, standard footprint, dead bolt
Variator B
11 levers, standard footprint, changeable, dead bolt
Praetor B
11 levers, standard footprint, dead bolt
Praetor
11 levers, standard footprint, dead bolt
Variator A
8 levers, standard footprint, changeable, dead bolt
Convar F
8 levers, changeable, flat bolt, 2-way closure
Convar Flex
8 levers, changeable, no change tool required, non key retaining,...
Convar B
8 levers, changeable, dead bolt
President A
8 levers, standard footprint, dead bolt
President
8 levers, standard footprint, dead bolt
Curator 100
7 levers, dead bolt, 3-way closure (opt.), keyhole non concentric...
Curator 80
For profile cylinder, dead bolt, 3-way closure (opt.), double-bit...
Tricontus A
8 levers, triple bolt
Tricontus
8 levers, triple bolt
Vary
8 levers, changeable, dead bolt
Vary Flex
8 levers, changeable, dead bolt
Centurio A
8 levers, flat bolt
Centurio
8 levers, flat bolt
Centurio A Plus
8 levers, flat bolt, 3-way closure
Centurio Plus
8 levers, flat bolt, 3-way closure
Arator
7 levers, dead bolt, 2-way closure (opt.)
Defender 710
2-lock operation, 1-/2-/3-/4-sided, front shaft support, integrat...
Defender 720
2-lock operation, 1-/2-/3-sided, front shaft support, integrated ...
Defender 520
2-lock operation, 2-/3-/4-sided, gear drive
Defender 510
1-lock operation, 2-/3-/4-sided, gear drive
Defender 520 S
2-lock operation, 2-/4-sided, gear drive
Defender Univers
1-lock operation: lock with standard footprint or Code-Combi K, 2...
Defender 210
1-lock operation, 4-sided, gear drive
Relino 181
Height approx. 181 mm, with radial and axial spherical plain bear...
Relino 106 K
Height approx. 106 mm, self-lubricating bearing bushes, adjustabl...
Relino 131
Height approx. 131 mm, self-lubricating bearing bushes, adjustabl...
Relino 131 K
Height approx. 131 mm, self-lubricating bearing bushes, adjustabl...
Relino 131 A
Height approx. 131 mm, false hinge with lead-through for cables
Relino 71
Height approx. 71 mm, self-lubricating bearing bushes (opt.)
Arvant R
Polished aluminium EV1 anodised, profile mounted, projecting 137....
Combi Drive
Drive 42 mm off-centre, for 3 wheel or 4 wheel (opt.) combination...
Servant R
Key carrier set for detachable bit part, Polished aluminium EV1 a...
Servant K
Key carrier set for detachable bit part, Steel
We laten je graag meer zien
dormakaba Belgium N.V.
Monnikenwerve 17-19
8000 Brugge, België
Phone: +32 50 45 15 70
E-Mail: info.be@dormakaba.com
Kunt u niet vinden wat u zoekt?
Neem contact met ons op