RCI 8310/8320 MultiMag®

The MultiMag® series of electromagnetic locks are designed for easy installation and multi-purpose operation for interior or perimeter doors. The mounting bracket has keyhole mounting to support the magnet, freeing the installer's hands to affix the magnet mounting screws. The removable cavity cover offers quick, easy access to wiring. The RCI 8310 MultiMag® applies to single outswinging doors, while the RCI 8320 MultiMag® is for double outswinging doors. For additional security monitoring these electromagnetic locks offer optional door status & security condition sensors.

Get in touch

8310 MultiMag Electromagnetic Locks RCI EAD

250mA Auto-Sensing 12-24VDC (Max at 12VDC for 8310, 500mA for 8320)
Up to 1,200lbf Holding Force (Each Electromagnet)
Fail-Safe
Optional Door Status Sensor (DSS)/ Security Condition Sensor (SCS) Available
Lifetime Limited Warranty

Product Details

Adjustable keyhole mounting
Built-in time delay (instant release with adjustable relock, programmable from 0-35 seconds)
Convenient plug-in wiring terminals
Easy-access wiring cavity
Surge protection
Self-drilling Teks® fasteners
UL 294 Special Locking Arrangement Component
CAN/ULC S104
UL 10C 3-Hours
California State Fire Marshal listed (CSFM: 3774-2275:0500)

Technical Details

8310 Multimag
Dimensions: 10-1/2"W x 2-7/8"H x 1-5/8"D (268mm x 73mm x 41mm) – Includes 1/4" (6mm) mounting bracket
Armature Plate: 7-7/16"W x 2-3/8"H x 5/8"D (190mm x 61mm x 16mm)

8320 Multimag
Dimensions: 21-1/8"W x 2-7/8"H x 1-5/8"D (536mm x 73mm x 41mm) – Includes 1/4" (6mm) mounting bracket
Armature Plate: 7-7/16"W x 2-3/8"H x 5/8"D (190mm x 61mm x 16mm) each

Shared Technical Information

Hardened steel armature nut
Self-drilling Teks® fasteners
Includes 5/8" (16mm) armature plate, optional 3/8" (9.5mm) available
Available in Brushed Anodized Aluminum (28) or Brushed Anodized Dark
Bronze (40) finish

Components

Angle Brackets
For narrow aluminum frames or center-hung single-acting doors, when inadequate space is left for mounting.
Available in Brushed Anodized Aluminum (28) or Brushed Anodized Dark Bronze (40). Please specify when ordering.
Model Dimensions Finish Compatible With:

AB-01 1"H x 1"W x 10-1/2"L 28/40 for 8310
AB-02 1-1/2"H x 1"W x 10-1/2"L 28/40 for 8310
AB-03 1-1/2"H x 1-1/4"W x 10-1/2"L 28/40 for 8310
AB-20 1"H x 1"W x 21"L 28/40 for 8320
AB-21 1-1/2"H x 1"W x 21"L 28/40 for 8320
AB-22 1-1/2"H x 1-1/4"W x 21"L 28/40 for 8320

Armature Bolts

Compatible With: 8310
- ARMB155 2-1/8" (55mm) For doors 1-3/4"-2-1/4" (44-57mm) thick
- ARMB170 2-3/4" (70mm) For doors 2-1/4"-2-3/4" (57-70mm) thick
- ARMB180 3-1/8" (80mm) For doors 2-1/2"-3" (70-76mm) thick
Compatible With: 8320
- ARMB255 2-1/8" (55mm) For doors 1-3/4"-2-1/4" (44-57mm) thick
- ARMB270 2-3/4" (70mm) For doors 2-1/4"-2-3/4" (57-70mm) thick
- ARMB280 3-1/8" (80mm) For doors 2-1/2"-3" (70-76mm) thick

Armature Plates

AP01 3/8" (9.5mm) Steel for 8310, 8320
AP02 5/8" (16mm) Steel for 8310, 8320,
AP20 3/8" (9.5mm) Steel for 8310xDSS, 8320xDSS
AP21 5/8" (16mm) Steel for 8310xDSS, 8320xDSS

Armature Plate Holders
Available in Brushed Anodized Aluminum (28) or Brushed Anodized Dark Bronze (40). Please specify when ordering.

AH10 8310 armature plate holder 28/40 for 8310
AH15 8310xDSS armature plate holder 28/40 for 8310xDSS
AH20 8320 armature plate holder 28/40 for 8320
AH25 8320xDSS armature plate holder 28/40 for 8320xDSS

Conduit Mounting Bracket
Used anywhere surface-mounted conduit is required to run wires to the face of the magnetic lock.

CMB108 1"D x 2-11/64"H x 10-9/16"L 28 for 8310

DSS Retrofit Kits
If a door status sensor is desired after magnet has been installed, it can easily be added on site. Kit includes both Brushed Anodized Aluminum (28) and Brushed Anodized Dark Bronze (40) cover plate screws.

DSR01 3/8" (9.5mm) Steel for 8310
DSR02 5/8" (16mm) Standard Steel for 8310
DSR03 3/8" (9.5mm) Steel for 8320
DSR04 5/8"(16mm) Standard Steel for 8320

Filler Bars
For frame stops narrower than 2" (51mm).
Available in Brushed Anodized Aluminum (28) or Brushed Anodized Dark Bronze (40). Please specify when ordering.

FB-01 1/4"H x 3/4"W x 10-1/2"L 28/40 for 8310
FB-02 3/8"H x 3/4"W x 10-1/2"L 28/40 for 8310
FB-03 1/2"H x 3/4"W x 10-1/2"L 28/40 for 8310
FB-04 5/8"H x 3/4"W x 10-1/2"L 28/40 for 8310
FB-05 1/2"H x 5/8"W x 10-1/2"L 28/40 for 8310
FB-20 1/4"H x 3/4"W x 21"L 28/40 for 8320
FB-21 3/8"H x 3/4"W x 21"L 28/40 for 8320
FB-22 1/2"H x 3/4"W x 21"L 28/40 for 8320
FB-23 5/8"H x 3/4"W x 21"L 28/40 for 8320
FB-24 1/2"H x 5/8"W x 21"L 28/40 for 8320

Glass Door Brackets
Required for glass doors without mounting rails.

GB8112 1/2" (13mm) 32 for 8310
GB8134 3/4" (19mm) 32 for 8310
GB8212 1/2" (13mm) 32 for 8320
GB8234 3/4" (19mm) 32 for 8320

L Brackets
Required when there is no space on the header to mount the magnetic lock.
Magnet mounts on bracket and bracket mounts on vertical face of frame.
Available in Brushed Anodized Aluminum (28) or Brushed Anodized Dark Bronze (40). Please specify when ordering.

LB-10 2-1/2"H x 2"W x 10-1/2"L 28/40 for 8310
LB-20 2-1/2"H x 2"W x 21"L 28/40 for 8320

Spacers
For aluminum blade stop frames. Used to lower the magnet to align with armature plate.
Available in Brushed Anodized Aluminum (28) or Brushed Anodized Dark Bronze (40). Please specify when ordering.

SP-01 1/4"H x 1-1/2"W x 10-1/2"L 28/40 for 8310
SP-02 3/8"H x 1-1/2"W x 10-1/2"L 28/40 for 8310
SP-03 1/2"H x 1-1/2"W x 10-1/2"L 28/40 for 8310
SP-04 5/8"H x 1-1/2"W x 10-1/2"L 28/40 for 8310
SP-20 1/4"H x 1-1/2"W x 21"L 28/40 for 8320
SP-21 3/8"H x 1-1/2"W x 21"L 28/40 for 8320
SP-22 1/2"H x 1-1/2"W x 21"L 28/40 for 8320
SP-23 5/8"H x 1-1/2"W x 21"L 28/40 for 8320

Split Armature Plates
Allow use of single magnet lock with pair of doors.

SA138 3/8" (9.5mm) Steel for 8310
SA158 5/8" (16mm) Steel for 8310

Top Jamb "Z" Bracket
Allows for horizontal adjustment of armature plate. Mounted on pull side of the door.
Available in Brushed Anodized Aluminum (28) or Brushed Anodized Dark Bronze (40). Please specify when ordering.

TJ10 8310 Z bracket kit 28/40 for 8310
TJ20 8320 Z bracket kit 28/40 for 8320

Hardware Packs

HK8310: Includes: Allen wrench, metal sleeve, armature bolt, sexnut, bolt, steel washers, rubber washers, flat head screws, pan head screws, plugs, TEK screws for 8310, 8320 (Buy 2 to make one 8320 Hardware kit)