Defender 710 - Bolt Work

1- to 4-sided bolt work for safes CEN II-V.

The bolt work is prepared for the use of a glass plate. Due to two patented front shaft supports in form of integrated massive steel elements a very high manipulation protection is achieved. During the opening process the blocking is released by the forward motion of the shafts II and III. Afterwards shaft I is drawn back.

No defined locking order in case of 2-lock operation.

Свържете се

Product Details

Bolt work

Dimensions base plate 224 x 420 mm
Installation applications
- 2-lock operation
- 3-sided (front shaft I, upper shaft II, lower shaft III)
- Shaft I throw 25 mm, shaft II/III throw 34 mm, opening angle of handle 110°
- Shaft connections: Ø 10.5 mm
- Lock mounting: 4 M6 threaded bushes
- Mounting position of locks: vertical, bolt up/down, bolt throw 8.7 - 12 mm, blocking of horizontal shafts
- For right hand doors, opening clockwise
Manipulation protection
- Support shaft I, release by forward motion of the shafts II/III
- 2 integrated relockers, detent in blocking position
- Prepared for use of a glass plate
- Indirect blocking point
Steel chromated
Gear drive with follower 11 mm
Prepared for Ristow-Element 4.4
Weight approx. 7,770 g

Technical Details

Bolt work

Defender 710 - standard - Order number: 83421

Options

1-sided (front shaft I)
2-sided (front shaft I, upper shaft II )
4-sided
1-lock operation, coupling of the second lock position with the operating lock
3 integrated relockers, detent in blocking position
For left hand doors, opening counter-clockwise

Special types on request

Accessories

Screw for blocking slide of the lock (2 screws per lock are needed) - Order number: 1 260 400 137
Bolt distance plate for combination locks, throw 8.7 mm - Order number: 2 140 000 010
Connection set Ristow-Element 4.4 for right hand doors - Order number: 3 118 000 110
Connection set Ristow-Element 4.4 for left hand doors - Order number: 3 118 000 100